|| Sep 6, 2006
June 12, 2006
March 14, 2006
February 24, 2006
December 5, 2005
| 7.7g3 (Kaspersky
Upgrade / download instructions
This release of ELWAVE 7.7 contains the following new features
- Added support for Interactive Brokers historical
and real-time data (req. UDS module)
With the introduction of version 7.7d you can now make direct
use of historical and realtime data from your Interactive
Brokers account. This functionality requires the UDS ServerFeed
- Hardware lock not found error fixed
The ELWAVE 7.7b update fixes a problem with the hardware
lock drivers that causes ELWAVE to display a 'Hardware
lock not found' error message even though the hardware lock
is plugged in. The problem is caused by the hardware lock
driver (sentinel.sys) which was signed by the hardware lock
manufacturer with a digital signature (certifcate) that
expired on March 13, 2006. Because the signature did also
not have a timestamp, this rendered the driver useless on
Windows NT and XP systems. This affects both parallel port
and USB hardware locks.
This new release will force the incorrect driver file to
be overwritten with a version.
- Optimized time frame analysis
You can now directly tell ELWAVE what time frame to analyze.
Just click and hold the 'Go Analyze' button for more than
one second and select the time frame from the drowdown list
that you would like to analyze. This is a major new feature
which makes it possible to adjust the analysis results from
ELWAVE such that they are always directly relevant to the
way and time frame that you trade.
It is possible that there is not sufficient historical data
(loaded) to analyze the currently active/selected (larger)
time frame, resulting in an error message. When this happens,
you can either: 1) Load more data, if available, or 2) analyze
a smaller time frame.
It is also possible that the data that is loaded does not
provide sufficient detail for the currently selected (smaller)
time frame. In this case either 1) Load more detailed data
(e.g. 1 min instead of 5 min), or 2) analyze a higher time
The Batch Processor also supports the new optimized
time frame analysis. There is a seperate setting
for the time frame to analyse in the Batch Processor.
- Added support for IQFeed®
You can now open charts from IQFeed® directly by simply
entering the symbol or using the Search button in the Select
Symbol window. To load a chart from IQFeed®, select
'Chart|New Chart...' and select IQFeed
in the Provider
or Files of Type
field. Your charts will be updated in real time automatically.
This feature required the UDS ServerFeed module.
- Added support for Yahoo end-of-day downloadable historical
data ASCII format (table.csv)
To import Yahoo historical data, select 'Chart|New chart?'.
Choose ASCII in the 'Provider' or "Files of Type' field.
Select 'DD-MM-YYYY' as the Date Format. Make sure that 'Most
recent date in first line is checked. This feature does
not require the UDS ServerFeed module.
- Added support for Yahoo!®
You can now open charts from Yahoo! historical data
directly by simly entering the symbol in the Select Symbol
window. To load a chart from Yahoo!, select 'Chart|New Chart...'
and select Yahoo!
in the Provider
or Files of Type
Yahoo!® is currently a free end-of-day dataservice provided
by Yahoo!. As with any other data provider, Prognosis Software
Development can take no responsibility whatsoever for content
or the availability of this service. Yahoo specifically
states the following: "All information provided
"as is" for informational purposes only, not intended for
trading purposes or advice. Neither Yahoo! nor any of independent
providers is liable for any informational errors, incompleteness,
or delays, or for any actions taken in reliance on information
Please note that it is not allowed to redistribute data
downloaded from the Yahoo website either through a regular
web browser or through ELWAVE.
- Added support for tick charts from eSignal
It is now possible to open tick charts from eSignal. As
per the requirements set forth by eSignal, this is limited
to a maximum of 10 days.
- Improved support for Quote.com
Quote.com support now uses our new, easier to use interface.
To use the new interface, sleect Quote.com
QCharts as your provider instead of Quote.com.
- Improved support for TC2000/TC2005
TC2000 and TC2005 now use our new and much easier to use
interface. To use the new interface, select TC2000/TC2005
as your provider instead of TC2000.
- Batch Processor support for templates
Batch Processor now allows you to specify whether to open
an existing .elw chart, a blank new chart or a new chart
based on a specific template.
- Batch Processor in background
The Batch Processor can now run while you continue working
with ELWAVE. THe Scan Inspector cannot be used while the
Batch Processor is open.
- Select All
New 'Select All' function to easily select and delete all
chart objects such as manually placed wave labels, trend
lines etc. Right click on the chart and select Select
All from the popup menu.
- Automatic data error correction
Some Invalid OHLC data errors are now automatically corrected
during import. This feature can be disabled if necessary
by adding this lines to ELWAVE77.INI under the [ELWAVE]
header: FixOHLC=0 Alternatively you may add this line to
ELWAVE77.INI to generate a log of the corrections made in
RLogApp. You can open RLogApp to view this log by double-clicking
the Prognosis Icon in the system tray
- Fully automatic uninstall added
We no longer support Windows 95. Please do not try to
install this version on Windows 95 systems.
If you have a service contract, you should have received
an email from us with your new license key. If you have not
yet received your new license key, please send
us an email.
If you do not have a service contract, please use
our order page
to upgrade to version 7.7. You will receive a new license
key by email after we have processed your order.
ELWAVE 7.7 can be downloaded from our protected